Draperies & Tiebacks
"A view into the world of window fashions" |

Fabric Quilters & Window Fashions offers an extensive selection of window treatments: draperies, valances, cornices, decorative soft shades, canopies, as well as a full hard line, such as blinds and shutters.
Click on image for more details. |
- -4" Buckram in heading
-3 fold pleat tacked at bottom of pleat
-2" and 3" Buckram available at additional charge
-Lined drapery is 2 1/2 times full
-Sheer drapery is 3 times full - -4" Buckram in heading
-3 fold pleat tacked at TOP of pleat
-This treatment will traverse
-Lined drapery is 2 1/2 times full
-Sheer drapery is 3 times full - -4" Buckram in heading
-3" to 4" wide pleats with 1 1/2" spaces
-Used as a stationary treatment
-Drapery is 2 1/2 times full - -4" Buckram in heading
-Rolled Buckram inserted in pleats to keep shape
-Used as a stationary treatment
-Drapery is 2 1/2 times full - -4" Buckram in heading
-Used as a stationary treatment
-5 pleats per width
-Drapery is 2 1/2 times full
-Buttons are optional - -4" Buckram in heading
-Hand gathered pleats to form goblets
-1" Covered buttons at base of goblet
-Best used as a stationary treatment
-Drapery is 2 1/2 times full - -4" Buckram in heading
-Hand gathered pleats to form goblet
-Best used as a stationary treatment
-Drapery is 2 1/2 times full - RIPPLE BOX PLEAT
-4” Buckram in heading
-When stacked it looks like a roll pleat
-When flat it looks like an Inverted Box Pleat
-Clean Modern look can be used on a traverse rod or pole and rings - -Specify heading and rod pocket size
-Lined drapery is 2 1/2 times full
-Sheer drapery is 3 times full - -4" pencil pleat heading
-Drapery is 3 times full - -4" Diamond smocked heading
-Drapery is 3 times full - -No Buckram
-2 or 3 fold pleats tacked at top
-Pleats spaced approximately 10" apart
-Hand sewn rings suggested (see additional charge) - -Shaped tabs with 1" covred buttoms
-Tabs are 2" wide
-Specify tab length or pole diameter - -Ties are 3/4" wide x 15" long
- -Tacking strip to be stapled to a pole or dust board
-Suitable as staionary panels - -Double fullness suggested
-Buckram in top heading
-Grommets are set down 1" - 1 1/2" from top
-Specify grommet size based on inside diameter
-Specify color: Antique Brass, Brass, Nickel, Matte Nickel, Antique Copper, Black, and Satin SmokeGrommet Size #4 #6 #8 #10 #12 #15 #18 #20 Inside Diameter 1/2" 3/4" 1 1/8" 1 7/16" 1 9/16" 2" 2 1/2" 3" - -Snap tape sewn across top in back of drapery
-Specify rod width
-Specify desired fullness - 60%, 80%, 100%, or 120%
-Specify if Butt master or Overlap master - -Standard size is 72" x 72"
-Available lined or unlined
-12 Nickel grommets (Brass also Avialable)
-Button holes available - (see additional charge) - -Top and bottom shaped to allow hourglass effect
-Panel will shirr to 1/3 of rod width
-3" wide tieback with fastner included
-Specify heading and rod pocket size
-Specify finished length to include heading and rod pocket top and bottom - -Tied up with cord through rings on back
-Available using most heading styles
-This is a staionary treatment
-Specify height of pull back - -Please supply a template for the arch shape
-Used as a stationary treatment
-Flexible eyelet rodding can be supplied
-Arched dust board available (see additional charge)
-Tiebacks are optional
Tie Backs